CURT 7-Way RV Blade Trailer Brake Controller Tester 51498
CURT 51498 7-Way RV Blade Trailer Brake Controller Tester 7-Pin Trailer Wiring
- Perfect For Installing And Troubleshooting Wiring Systems
- Test Wiring For Battery Voltage Brake Voltage/Signal Circuits
- Volt Meter Indicator Measures Tow Vehicle And Electric Brakes
- Current Meter Uses Magnets To Measure Brake Control Output
- Incl. A 20 ft. Cable For Easy Single-User In-Cab Testing
- Constructed w/Durable Components For Long Life And Dependability
- Can Be Used For Two-Axle Or Three-Axle Trailers
- Made In USA
For any type of trailer, part of towing responsibly is making sure your trailer lights are working properly. With heavy-duty trailers, such as a large boat trailer or 5t Wheel camper, that responsibility is even greater. Giving safety its proper priority is easy with the CURT 7-way RV blade trailer brake controller tester. This sophisticated towing electrical tester plugs into an y 7-way RV blade socket and allows you to check your vehicle wiring for battery voltage, brake voltage and signal circuits. The CURT 7-way RV blade brake controller tester accurately measures the brake and battery voltage output at your 7-way connector. It features a volt meter and a current meter for testing brake power and allows you to test the power output of your trailer brake controller unit. The 7-way brake controller tester can be used for trailers with two or more axles, and because it uses a special magnet system, brake controller output can be measured even without a trailer attached. It includes easy-to-follow testing instructions and a 20 cable for single-user, in-cab testing to make it even easier to get to the bottom of any electrical problem. Operating the CURT 7-way RV blade electrical tester is simple and does not require an additional power source. Simply plug the 7-way RV blade into your vehicles electrical socket, select your settings with the axle and voltage switches, and you are ready to begin. The tester is able to check your left and right turn signals, brake lights, tail lights and reverse lights if applicable. It also provides the voltage and current of your vehicles brake controller output. The CURT RV blade tester also offers a number of potential causes of electrical failure, including fuse issues, inadequate wiring, damaged wires or a defective brake controller. The CURT 7-way brake controller tester is compatible with all CURT trailer brake controllers and gives you the peace of mind to Bring It on any towing adventure.
- Item Requires Shipping
- 12.0 lbs.
- W10.0000” x H7.0000” x L12.0000”
Total Reviews (0)
Write the First Review!
You must login to post a review.